Scott,
I discussed this with CVB author WB8VMN (the other half of DATOM) and he
has no specific answer - only that it is not specifically designed to work
with a FAT32 drive and has not been tested as such.
Dave
At 06:44 AM 10/16/00 -0500, Scott Dickson, W5WZ wrote:
>Here's another curious happening at W5WZ.
>
>I normally run CVB and NA under Windows 98, and have been able to use the
>features that I want to use. The recent question about com ports and IRQs
>got me to thinking about other "funnies" that I've run across.
>
>If I boot to DOS, loading only the necessary drives for the SoundBlaster,
>then try to run CVB, something really unexpected happens.
>Upon typing CVB and pressing enter, the normal CVB messages indicate that
>the program loaded successfully. But, the prompt never returns. If I
>then press any key, a DOS type message appears:
>
>General Drive Error
>Abort, Retry, Fail, or Ignore
>
>Selecting Abort or Fail will return a prompt. Any other selection has no
>affect.
>
>Any ideas? The only thing I can think of is that my hard disk uses FAT32
>for the file system.
>
>Again, everything works fine running in a DOS window under Win98. Under
>Win98, my configuration is:
>COM 1 - CW keying or CVB interface
>COM 2 - Rig control or RTTY via Kam+
>LPT1 - If Com 1=CVB, then CW keying.
>
>My desire to to get this computer set up to work in a pure DOS
>environment, with 4 com ports and 2 printer ports so that I don't have to
>swap cables around depending on the type of contest.
>
>--Scott, W5WZ
>
>--
>Submissions: na-user@contesting.com
>Administrative requests: na-user-REQUEST@contesting.com
>WWW: http://datom.contesting.com/
>Questions: owner-na-user@contesting.com
--
Submissions: na-user@contesting.com
Administrative requests: na-user-REQUEST@contesting.com
WWW: http://datom.contesting.com/
Questions: owner-na-user@contesting.com
|