At 06:57 AM 11/19/00 -0800, Scott Davis wrote:
>Does anyone have experience setting up computer
>control of a FT-1000MP using NA10.45 and the W9XT
>interface? We have the proper cable (RS232C not NULL
>modem), but were probably missing some important
>settings.
Scott,
The connector on the back of the W9XT card is NOT a serial port, so you
cannot connect it to the FT-1000MP for computer control.
The connector on the W9XT card is the connection point for the mic in, mic
out and PTT for the voice recorder functions.
Dave Pruett, K8CC
DATOM Engineering
datom@contesting.com
http://datom.contesting.com
--
Submissions: na-user@contesting.com
Administrative requests: na-user-REQUEST@contesting.com
WWW: http://datom.contesting.com/
Questions: owner-na-user@contesting.com
|