I believe you have to move a couple of jumpers in the box for it to work
with NA. As I understand it, it ships with the jumpers configured for CT and
TR LPT commands. You have to move them to make it completely functional with
NA.
I hope this helps.
Don
WX3M
----- Original Message -----
From: "Bob, N5RP" <n5rp@pdq.net>
To: <na-user@contesting.com>
Sent: Sunday, July 13, 2003 13 45
Subject: [NA-User] Top Ten Devices DXD
> Just got this Top Ten devices DX Doubler SO2R box all wired,
> and it seems to be running well except ............
>
> LPT will not drive the switching from radio 1 to radio 2 in automatic
> positions.
> The software switches from radio 1o to radio 2, as it has always done.
> The com ports read the radios properly as to band, mode, freq, etc.
>
> But, in switching from radio to the other as far as transmitting is
> concerned..............
> Only way to accomplish same is from radio 1 to radio 2 is in manual mode.
> In auto mode, the box wants to only listen and key radio #1.
>
> All else works well.
>
> Any tricks learned or experienced by others in making the LPT do radio
> switching functions for transmit and receive ?
>
> Running version 10.58, and all is configured properly in the config.exe
> program.
>
> Thanks,
>
>
> Bob Perring
> ...........................................
> Amateur Radio Station N5RP
> mailto:N5RP@pdq.net
>
> _______________________________________________
> NA-User mailing list
> NA-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/na-user
|