Re: [NA-User] SO2R

["David A. Pruett" <k8cc@comcast.net>]

Bob,

The fix is to add another selection to NA which will use the "standard" 
pinout.  We'll do this in a release coming before CQWW CW.

It's somewhat frustrating to me that NA was the first to support switching 
boxes for SO2R (actually by one or two years) with a logical, coherent 
selection of LPT pins.  It was only much later that the other programs 
picked up this support, and picked oddball pins which we must now support 
as well.

Dave

08:18 AM 10/29/03 -0600, Bob, N5RP wrote:
> OK,
> so this question might be in the gray area of where to go for the answer, 
> but I figure this might be the cleanest input group for best response.
>
> I am doing SO2R with a Top Ten Devices DX Doubler.
>
> To initially set this box up, you manipulate some internal jumpers in 
> order to accommodate NA software,
> and these jumpers are set differently than would be normally set for CT, 
> TR, and WriteLog.
>
> Since I use DX4Windows as my normal running day-to-day software, I am 
> having to go back and forth in moving  these jumpers from "contest" to " 
> normal".
>
> Anyone have thoughts on how to get around this problem without doing the 
> "opening of the SO2R box and moving the taps routine" on a frequent basis ?
>
>
> Bob Perring
> ...........................................
> Amateur Radio Station  N5RP
>
>
> _______________________________________________
> NA-User mailing list
> NA-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/na-user
> NA on the web:  http://www.datomonline.com/


_______________________________________________
NA-User mailing list
NA-User@contesting.com
http://lists.contesting.com/mailman/listinfo/na-user
NA on the web:  http://www.datomonline.com/