To: | "Bob, N5RP" <n5rp@pdq.net> |
---|---|
Subject: | Re: [NA-User] LPT pinouts |
From: | "David A. Pruett" <k8cc@comcast.net> |
Date: | Sat, 13 Dec 2003 00:11:20 -0500 |
List-post: | <mailto:na-user@contesting.com> |
Bob, Your wish is about to come true... Since I was digging in to fix the ARRL 10M mixed mode spot problem identified by NX5M, I decided to tackle this as well. The changes have been made to NA, and verified with by TopTen DXDoubler, but the Array Solutions SO2R should work as well. One slight issue arises when we try to commonize with the "standard" LPT pinouts used by the other programs. None of them (to the best of my knowledge) support the mono/stereo control from the computer. This seems confirmed when I review the schematic for my DXDoubler. If you're using a DXDoubler you'll need to set Jumper1 and Jumper3 as documented for CT/TR/WL, but Jumper2 will need to be set in the NA position. (This jumper does nothing in the CT/TR/WL position.) The end result should be a set of jumper positions which will alleviate the need to open the box to switch between programs. These changes will be in 10.60 which will appear on the web site some time this weekend. I originally planned to do this tonite, but I have to clean up some stuff to get an official release together. I'll post a note here on the reflector when the new version is on the site. 73, Dave/K8CC At 12:34 PM 12/12/03 -0600, Bob, N5RP wrote: Dave, _______________________________________________ NA-User mailing list NA-User@contesting.com http://lists.contesting.com/mailman/listinfo/na-user NA on the web: http://www.datomonline.com/ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [NA-User] spam from a subscriber to this list, David A. Pruett |
---|---|
Next by Date: | Re: [NA-User] spam from a subscriber to this list, Craig Clark |
Previous by Thread: | [NA-User] LPT pinouts, Bob, N5RP |
Next by Thread: | [NA-User] spam from a subscriber to this list, k9tm |
Indexes: | [Date] [Thread] [Top] [All Lists] |