Yup, I was doing something wrong. Believing it when I was asked for my
location!
Problem solved, entered ""#" at the right place and the proper log came
out.
Thanks!
Merry Christmas,
Jim K8MR
In a message dated 12/20/2010 4:03:50 P.M. Eastern Standard Time,
k8cc@comcast.net writes:
I suspect you're doing something wrong :-(
In the 10M contest for DX stations needing to show their QSO number in the
sent exchange field, they need to put a # symbol in the location field on
the "Information Sheet". You may ask "why?". W/VE stations put their
state/province in this field - it's part of the "sent" information.
I suspect this will work for RAC as well. I've never had problems
submitting RAC logs in the past...
73, Dave/K8CC
Sent from my iPhone
On Dec 19, 2010, at 9:15 AM, Jimk8mr@aol.com wrote:
> I operated the RAC Winter Contest yesterday with the new 10.71 version.
I
> noticed however that the Cabrillo log generated included my QTH rather
than
> my sent QSO number.
>
> I did a quick test for the 10 Meter contest from a DX location and found
> the same thing - the location entered when setting up the file was in
the
> sent log, not the sent qso number.
>
> Am I doing something wrong, do I have obsolete CRT templates, or is this
a
> problem with NA?
>
>
> 73 - Jim K8MR
_______________________________________________
NA-User mailing list
NA-User@contesting.com
http://lists.contesting.com/mailman/listinfo/na-user
NA on the web: http://www.datomonline.com/
|