Orion
[Top] [All Lists]

[Orion] Re: [TenTec] Chasing RTTY DX with the Orion

To: tentec@contesting.com
Subject: [Orion] Re: [TenTec] Chasing RTTY DX with the Orion
From: Charles Greene <W1CG@QSL.NET>
Date: Wed, 04 Aug 2004 07:47:56 -0400
List-post: <mailto:orion@contesting.com>
Duane,

You can check out the New Communications Solutions Multi-RX Mixer at www.ncsradio.com I checked it out but decided to do something different for my case. I don't have an Orion, but operate S02R using two K2's or a K2/100 and an Omni-VI. I use N1MM Logger which runs two MMTTY's and two sound cards. It will also operate SO2V (two vfos, one transmitter) which may be more appropriate for the Orion.

Chas,

W1CG

At 07:32 PM 8/3/2004, Duane A Calvin wrote:
After chasing YV0D for hours unsuccessfully, I'm a bit discouraged.  In
SSB and CW pileups, I can listen to the pileup with the SubRX and find
where the DX station is picking from the pile. However, if I try to mix
the SubRX and Main audio into the left channel which is going to my HAL
DXP38, it is not very effective.  What technique are the rest of you RTTY
guys using to listen to the pile while working DX??  I thought of running
another line from the "left" audio to the PC soundcard, but that seems
like a lot to manage.

        73,  Duane
--------------------------------------
Duane Calvin, AC5AA
Austin, Texas

http://home.austin.rr.com/ac5aa
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________ Orion mailing list Orion@contesting.com http://lists.contesting.com/mailman/listinfo/orion

<Prev in Thread] Current Thread [Next in Thread>