Orion
[Top] [All Lists]

Re: [TenTec] [Orion] Orion TCXO adjustment

To: <orion565@yahoogroups.com>, "orion" <orion@contesting.com>,<tentec@contesting.com>
Subject: Re: [TenTec] [Orion] Orion TCXO adjustment
From: "Carl Moreschi" <n4py@arrl.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 4 Aug 2005 08:00:31 -0400
List-post: <mailto:tentec@contesting.com>
My N4PY Orion program has a software calibrate procedure.  This procedure
makes the program display be within a few hertz at 10 mhz and has the
advantage of not having to adjust the Orion hardware.

Carl Moreschi N4PY
Franklinton, NC
----- Original Message ----- 
From: "Martin, AA6E" <martin.ewing@gmail.com>
To: <orion565@yahoogroups.com>; "orion" <orion@contesting.com>;
<tentec@contesting.com>
Sent: Wednesday, August 03, 2005 10:58 PM
Subject: [Orion] Orion TCXO adjustment


> My method of tweaking the Orion's TCXO for best frequency accuracy is
> described and illustrated at http://blog.aa6e.net .  No, you don't
> need to do this for normal operation, unless you really want to be on
> freq with your nets.  It was interesting to see how well we could do
> with stock parts.  (Within a couple of Hz at 10 MHz.)
>
> 73 Martin AA6E
> -- 
> martin.ewing@gmail.com
> _______________________________________________
> Orion mailing list
> Orion@contesting.com
> http://lists.contesting.com/mailman/listinfo/orion

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>