Version 1.373b1
- Added additional checks for Curtis keyer control to MENUs. Was only
called on power-up.
- Add WAIT_FOR_DSP_COMPLETE to mainRF routine. Toby P was reporting
noise bursts.
- Added call to agc_change in serial AGC routine.
Version 1.373b2
- Removed call to update xtal filter drivers inside the PBT_BW routine.
This is now handled in the interrupt
routine. Having it in two placed was causing a conflict when writing to
the interface chips.
- Added main_dsp_squelch variable to handle MOX for the main receiver.
Was inadvertantly using the sub receivers
squelch value for the mains MOX unmute value. This caused a SQL problem
when the main receiver was in CW mode anytime.
Version 1.373b3
- Corrected problem in AGC system: Occasional noise burst when BW
encoder or the RF gain knob moved.
Version 1.373b4
- Eliminated passing of AGC info to DSP. This was causing Out Of Band
distortion when used.
01/18/05 Version 1.373b5
- Modified serial control of SubRx AGC. Was not updating sub receiver as
it should.
Duane A Calvin wrote:
> Does anyone have the errata files for what changed between 1.372 and
> 1.373b5? A couple of us here in central Texas are moving back to the
> 1.3xx levels until TT gets the 2.x FW fixed for the Orion I's due to the
> superior noise reduction, AGC adjustability, etc., etc. We'll live with
> the sweep/BW interaction problems. But in order to choose between the
> two levels mentioned, it would help to know what the fixes were (and even
> what broke on later 1.373b5 level, if any of that has been summarized).
>
> 73, Duane (for me and K5LN)
>
> --------------------------------------
> Duane Calvin, AC5AA
> Austin, Texas
>
> http://www.ac5aa.com
> _______________________________________________
> Orion mailing list
> Orion@contesting.com
> http://lists.contesting.com/mailman/listinfo/orion
>
>
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|