I'd say that's the right thing to do.
I've never had a hardware problem with either of the Orion I boxes I've
owned (still have one of them), but had to send my II back twice to get a
flakey logic board replaced. Somewhat irritating (understatement), but it
ended up fixed and stable.
Still far better than my experience with another vendor some years ago to
get their "top of the line" radio fixed. I finally had to reduce line
voltage to 100V with a bucking transformer to keep the power supply (built
to certain Asian voltage specifications) from roasting itself to oblivion
every couple of years at US line voltage levels :-)
Grant/NQ5T
> -----Original Message-----
> From: orion-bounces@contesting.com
> [mailto:orion-bounces@contesting.com] On Behalf Of Skip K3CC
> Sent: Monday, March 19, 2007 5:02 PM
> To: Orion@contesting.com
> Subject: [Orion] ver 2
>
> I called TT this morning and was told to download ver 2 ad
> try it. It will
> work but no Sweep. I have downloaded the firmware from the
> internet 3 x's
> and tried to up load the Orion many times ver 2 ...B stops
> at 462 and ver
> 2....stops at 7654 neither will load.
>
> Next is send it back to TT
>
> de Skip K3CC
_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion
|