| To: | "Michael Tope" <W4EF@dellroy.com>,"Tom Horton" <k5iid@sbcglobal.net>, <RFI@contesting.com> |
|---|---|
| Subject: | Re: [RFI] toroids |
| From: | "Tom Rauch" <w8ji@contesting.com> |
| Reply-to: | Tom Rauch <w8ji@contesting.com> |
| Date: | Sun, 15 Aug 2004 06:15:43 -0400 |
| List-post: | <mailto:rfi@contesting.com> |
> Yes and no, Tom. You can wind a known number of turns on each > toroid and then measure the inductance with an impedance analyzer > like the MFJ-259B. And that's all you need to do. You don't need to know the manufacturer OR the mix, all you need to know is the impedance. 73 Tom _______________________________________________ RFI mailing list RFI@contesting.com http://lists.contesting.com/mailman/listinfo/rfi |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [RFI] toroids, Ian White, G3SEK |
|---|---|
| Next by Date: | Re: [RFI] toroids, Tom Rauch |
| Previous by Thread: | Re: [RFI] toroids, Ian White, G3SEK |
| Next by Thread: | Re: [RFI] toroids, Tom Rauch |
| Indexes: | [Date] [Thread] [Top] [All Lists] |