RFI
[Top] [All Lists]

Re: [RFI] Got RFI ? - Some Good Solutions Material

To: rfi@contesting.com
Subject: Re: [RFI] Got RFI ? - Some Good Solutions Material
From: N6KI Dennis Vernacchia <n6ki_73@sbcglobal.net>
Date: Sat, 02 Dec 2006 21:18:51 -0800
List-post: <mailto:rfi@contesting.com>
> Hi All,
>
>     I was in the process of making a group buy for our local radio club
> of some -31 Mix Ferrite clamp on beads
> that will fit tightly on RG-213 size coax and also be good for smaller 
> cables that I could
> thread thru several times for efficacy. ( Hole is approx 0.400" )
>
>     I discovered that Mouser Electronics now sells at least this one 
> particular -31 Mix Ferrite
> bead that works well for RFI problems per Jim Brown's recommendations 
> in the past
> on this reflector. ( These do well in place of 43 or 77 mix and I now 
> use this
> mix exclusively from 160 thru 6 mtr band to resolve RFI probs )
>
>     They are $2.70 in small quantity but drop to $1.70 for 100 pieces, 
> so get together with
> a few buddies or your local contest or DX club and snap up the discount !
>
> You can get to Mouser's order page by typing
>
> 0431167281 in Google search and it will be the first hit you get
>
> or go to www.mouser.com and enter part number  623-0431167281
>
>
>       Mouser
> Part #        Mfr.'s
> Part #        Manufacturer
> Description
> Your Part#    Order
> Qty.  Availability*   Price   Ext.
>       623-0431167281  0431167281
> Fair-Rite     FERRITE SNAP CASE - RoHS: COMPLIANT
>
>
> *NOTE: Important !*
> I found one anomaly with these and that is that if you do use them to 
> snap directly onto
> RG-213 type coax ( approx 0.400" Diameter) or coax with the same 
> diameter, the plastic shell that comes
> with the bead has a slightly* smaller *diameter than the hole in the 
> ferrite bead itself and will not allow
> you to clamp the bead onto the coax until you take a pair of diagonal 
> cutters and trim the
> plastic making the hole bigger. Just a nuisance for now as I have 
> alerted Mouser  and Fair-rite
> and hopefully they will use the correct plastic shell in the future.
>
>     Also, if you would like to buy 2.4" Round ( Donut ) type, ( 
> Fairite P/N *2631803802  )
> *and these are really great for really tough RFI problems, you can 
> order them from Dexter Magnetic Technologies   
>      I am not sure what their minimum order is but when I do my group 
> buys of 100 pieces
> I have gotten a piece cost down near $3, though I hear the price will 
> be rising sharply soon
> due to the price of one of the materials use in making the -31 MIX - ( 
> like going to $4.28 ea in 100 Qty ! )
>
> DEXTER MAGNETIC TECHNOLOGIES <http://www.dextermag.com>
> 800/775-3829
>
> or go to www.fair-rite.com
>
> click on PRODUCTS ( First Pull Down Tab)
> then click on DISTRIBUTER STOCK LOOKUP
> Then enter the part number *2631803802 ( 2.4 inch Donut -31 Mix )
>
> *and something like this info below will come up shoping who has stock.
>
>
> 2631803802    160     11/26/2006      Amidon Inductive Components 
> <http://www.amidoncorp.com>   800/898-1883
>       714/850-1163
>       Email 
> <http://www.mectronic.com/scripts/mfgsendmail.asp?val=yes&NAD__ID=11752&mfgID=4605&companyemail=sales%40amidoncorp%2Ecom&companyname=Amidon+Inductive+Components&PartNo=2631803802>
>  
>       RFQ 
> <http://www.mectronic.com/scripts/mfgrfq.asp?val=yes&NAD__ID=11752&mfgID=4605&companyemail=sales%40amidoncorp%2Ecom&companyname=Amidon+Inductive+Components&PartNo=2631803802&txtUserID=&mfgname=Fair%2DRite+Products+Corp%2E>
>  
>       PO 
> <https://www.mectronic.com/scripts/mfgpoform.asp?val=yes&NAD__ID=11752&mfgID=4605&companyemail=sales%40amidoncorp%2Ecom&companyname=Amidon+Inductive+Components&PartNo=2631803802&txtUserID=&mfgname=Fair%2DRite+Products+Corp%2E>
>  
>
> 2631803802    305     11/24/2006      Kreger Components, Inc 
> <http://www.kregercomponents.com>     800/609-8186
>       540/776-7890
>       Email 
> <http://www.mectronic.com/scripts/mfgsendmail.asp?val=yes&NAD__ID=14120&mfgID=4605&companyemail=ferrites%40kregercomponents%2Ecom&companyname=Kreger+Components%2C+Inc&PartNo=2631803802>
>  
>       RFQ 
> <http://www.mectronic.com/scripts/mfgrfq.asp?val=yes&NAD__ID=14120&mfgID=4605&companyemail=ferrites%40kregercomponents%2Ecom&companyname=Kreger+Components%2C+Inc&PartNo=2631803802&txtUserID=&mfgname=FAIR%2DRITE+PRODUCTS>
>  
>       PO 
> <https://www.mectronic.com/scripts/mfgpoform.asp?val=yes&NAD__ID=14120&mfgID=4605&companyemail=ferrites%40kregercomponents%2Ecom&companyname=Kreger+Components%2C+Inc&PartNo=2631803802&txtUserID=&mfgname=FAIR%2DRITE+PRODUCTS>
>  
>
> 2631803802    211     11/20/2006      DEXTER MAGNETIC TECHNOLOGIES 
> <http://www.dextermag.com>    800/775-3829
>
>
>
> I have NO pecuniary interest in this matter
> ( I make not 1 stinkin PESO ! )
>
> 73, Dennis Vernacchia N6KI
> San Diego
>
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>