RFI
[Top] [All Lists]

Re: [RFI] Help on speed drive motor controller RFI

To: rfi@contesting.com
Subject: Re: [RFI] Help on speed drive motor controller RFI
From: Tim Groat <tcgroat@mesanetworks.net>
Date: Mon, 29 Jan 2007 19:08:04 -0700
List-post: <mailto:rfi@contesting.com>
The product brochure Juan linked to shows RFI filters as accessories. It 
appears they need to be ordered separately and assembled on-site. The 
installation manual may also specify that the motor leads be shielded. That 
is a common requirement for this type of device--one often ignored by the 
installers, to save time and money.

So the first step is to be sure the unit is installed as specified by the 
manufacturer, including all recommended filters and wired per the manual.

73,

--Tim (KR0U)

>"Juan EA5RS" <ea5rs@ono.com>:
>
>Based on manufacturer description these drives are based on "space vector 
>technology" "using carrier frequencies up to 15 KHz"
>
>http://www.powerelectronics.es/descargas/sd250/SD25CA01CI.pdf


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>