RFI
[Top] [All Lists]

Re: [RFI] TVI

To: "RFI@contesting.com" <RFI@contesting.com>
Subject: Re: [RFI] TVI
From: "Jim Brown" <jim@audiosystemsgroup.com>
Date: Wed, 20 Jun 2007 21:03:19 -0700
List-post: <mailto:rfi@contesting.com>
On Wed, 20 Jun 2007 19:19:33 EDT, CatWhiskR@aol.com wrote:

>Can a particular TV be so susceptible to overload that it could 
>be the problem? 

Sure. Lousy shielding is a common problem and possible culprit. In 
other words, it could be picked up on the wiring within the TV. That 
means replacing the TV. 

However: It still might be coming in on the wiring that you choked. 
A ferrite choke is basically a very low Q resonant circuit, and will 
cover a frequency ratio of about 6:1.  Toroids aren't very useful on 
6M, because the stray C causes the choke to resonate much lower in 
frequency. In other words, what you have may be a good HF choke, but 
not a good 6M choke. Try adding a bunch of big #43 clamp-ons on the 
feedline and power line. 

See http://audiosystemsgroup.com/RFI-Ham.pdf

73,

Jim Brown K9YC


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>