On Sun, 27 Sep 2009 10:21:41 -0400, myles landstein wrote:
>> Was wondering if anyone might have some suggestions to fix or
>> reduce the type of noise I am getting...
See the discussion of variable speed motor drives in
http://audiosystemsgroup.com/RFI-Ham.pdf
The likely cause of the problem is radiation from current flowing in a loop
between the motor and the motor controller through ground. An AC line filter
will do nothing to fix that. The problem must be solved by modifying circuitry
(and/or wiring) in the loop carrying that current. If I were you I would call
the FCC, and I would also try to get ARRL involved.
73,
Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|