[Top] [All Lists]

[RFI] B Field Loop

To: rfi@contesting.com
Subject: [RFI] B Field Loop
From: chuck shinn <chuck.shinn@verizon.net>
Date: Thu, 12 Nov 2009 09:12:19 -0600
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
There were several question regarding loop dimensions so I thought I 
would post here. The loop dimensions that I am
using are 8.5 inches by 2.5 inches. The loop is constructed of mini coax 
RG-174 with the shield exposed at the handle end of the loop and only 
the center conductor attached to the shield at that point. Admittedly, 
it is hard to see well and I tried to post a larger image but have not 
been successful yet. If I can find a way I will post a larger image and 
note it here.

I hope this helps a bit. Best, Chas


RFI mailing list

<Prev in Thread] Current Thread [Next in Thread>
  • [RFI] B Field Loop, chuck shinn <=