On Fri, Mar 26, 2010 at 16:10, Pete Smith <n4zr@contesting.com> wrote:
> I bought a Qualtek 857-06/48 from Mouser (common and differential mode),
> figuring that it would fit in place of the filter-less IEC connector on
> the power supply. It didn't, so I took out my Dremel tool and spent a
> half-hour enlarging the hole. I don't know how you can foresee this, so
> just be forewarned - the holes aren't standard.
>
http://www.mouser.com/catalog/catalogUSD/641/1124.pdf
Interesting solution ...
--
Peter Laws | N5UWY | plaws plaws net | Travel by Train!
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|