Honeywell programable here and no problems even at high power.
Dale, k9vuj
On 03, Dec 2013, at 14:25, W5JR.Mike <w5jr.mike@gmail.com> wrote:
> I wonder if Honeywell's similar product has similar issues?
>
> tnx
> Mike / W5JR
>
>> On Dec 3, 2013, at 3:22 PM, David Cole <dave@nk7z.net> wrote:
>>
>> Well... That crosses off a Nest Thermostat from my list of cool geeky
>> things to own... I had actually been thinking about one...
>> --
>> Thanks and 73's,
>> For equipment, and software setups and reviews see:
>> www.nk7z.net
>> for MixW support see;
>> http://groups.yahoo.com/neo/groups/mixw/info
>> for Dopplergram information see:
>> http://groups.yahoo.com/neo/groups/dopplergram/info
>> for MM-SSTV see:
>> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>>
>>
>>
>>> On Tue, 2013-12-03 at 15:15 -0500, Larry Bryan wrote:
>>> Problem is they refuse to send another base and without it, the stat
>>> won't work.
>>>
>>> 73
>>> Larry - W8LIG
>>>
>>>
>>> On Tue, Dec 3, 2013 at 2:29 PM, David Cole <dave@nk7z.net> wrote:
>>> If it were mine, I would bypass it for RF. A call to Nest
>>> letting them
>>> know it is living in a high RF environment might be in
>>> order...
>>>
>>> Also, you might want to run some exposure calculations as
>>> well... :)
>>>
>>>
>>>
>>>
>>> --
>>> Thanks and 73's,
>>> For equipment, and software setups and reviews see:
>>> www.nk7z.net
>>> for MixW support see;
>>> http://groups.yahoo.com/neo/groups/mixw/info
>>> for Dopplergram information see:
>>> http://groups.yahoo.com/neo/groups/dopplergram/info
>>> for MM-SSTV see:
>>> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>>>
>>>
>>>
>>>> On Tue, 2013-12-03 at 13:09 -0500, Larry Bryan wrote:
>>>> I bought a NEST programmable thermostat in 2012 so I could
>>> monitor the
>>>> house while in Florida. It's worked very well until last
>>> month. I was
>>>> working 40m and after I was done, the wife wanted to know
>>> why the HVAC was
>>>> running and cold air coming out of the floor vents. I
>>> investigated and
>>>> found that both the AC and Heat was running and the
>>> thermostat was showing
>>>> the wrong temperature.
>>>>
>>>> Calling NEST the next day, I was informed that the base of
>>> the thermostat
>>>> has fusing and the fuse was blown. NEST sent a replacement
>>> base and after
>>>> installation, it was working again.
>>>>
>>>> Again last night while working a DXpedition on CW, I shut
>>> down and walked
>>>> into the family room to find the same thing had happened. My
>>> SteppIR is on
>>>> a tower directly adjacent to the house and it was raised to
>>> about 35 feet.
>>>>
>>>> So I'm looking for suggestions on how I can reduce the RF
>>> getting into the
>>>> thermostat. Obviously going back to an analog thermostat is
>>> a solution but
>>>> would like to make that the final solution if possible.
>>>> 73
>>>> Larry - W8LIG
>>>
>>>> _______________________________________________
>>>> RFI mailing list
>>>> RFI@contesting.com
>>>> http://lists.contesting.com/mailman/listinfo/rfi
>>>
>>> _______________________________________________
>>> RFI mailing list
>>> RFI@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/rfi
>>
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|