I would like Jim Brown to respond: does running fat copper from each piece of
equipment to a bus bar (as Peter Laws says he is doing) comply with your
direction to run fat copper between each piece of equipment and the one next to
it? (Bonding links become too long at RF? Creating loops which have
inductance and in effect, become receiving antennas? Creating multiple DC paths
between components because of cable shields?)
Sent from my iPad
> On Dec 19, 2013, at 1:08 PM, Peter Laws <plaws@plaws.net> wrote:
>
>> On Thu, Dec 19, 2013 at 10:34 AM, Jim Brown <jim@audiosystemsgroup.com>
>> wrote:
>> \
>> Go back and CAREFULLY read what I wrote about bonding everything together by
>> SHORT, FAT COPPER. That means a foot or two of #12 run DIRECTLY from the
>> computer to the radio, another from the computer to the DigiKeyer, another
>> from the DigiKeyer to the radio.
>
> Done. It's braid from each component (PC, PS, DK, radio) to the
> copper bus bar on the back of the shelf and braid to the rod outside.
>
> --
> Peter Laws | N5UWY | plaws plaws net | Travel by Train!
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|