The Kidde I had that went off when using even the transceiver (100 watts) was
the model KN-COB-LP-LS and plugged into a wall outlet, I see yours is
hardwired, maybe some difference in construction.
Dale, k9vuj
On 11, Jul 2014, at 11:52, w6rgs@cox.net wrote:
> Kelly,
> Last year, we re-wired the entire house (power, phone, cable tv and data) and
> installed new Kidde KN-COSM18 hardwired detectors, including one in the
> shack. No issues, even when the SB-220 is used.
> Bill W6RGS
>
>
> At 08:25 PM 7/9/2014, Kelly Johnson wrote:
>> I would also be interested to hear about others' experience with hardwired
>> smoke/fire/CO2 detectors. Building codes now require new construction to
>> have hardwired/interconnected smoke detectors. I read lots of horror
>> stories about hardwired smoke detectors on the web. All of the ionization
>> type smoke detectors and CO2 detectors in my house have no RFI/EMI
>> problems, but both of the photoelectric fire detectors chirp when I run
>> QRO. I have to pull out the battery when I run QRO. That wouldn't be so
>> easy with a hardwired detector, so I'd like to know how to avoid problems.
>> Will ferrite beads on the leads be sufficient? Are there brands that are
>> known to be less problematic?
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|