[Top] [All Lists]

Re: [RFI] Common Mode Line Filter

To: RFI List <rfi@contesting.com>
Subject: Re: [RFI] Common Mode Line Filter
From: Pete Smith N4ZR <n4zr@contesting.com>
Date: Mon, 11 Aug 2014 11:59:20 -0400
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
I have an inexpensive Qualtek computer input line filter that is rated 250 VAC at 3 amps.According to the schematic on the side, the third wire is grounded to the chassis on both sides of the filter. Would such an arrangement make for better filtering by solving the pin 1 problem, for the device using it?

73, Pete N4ZR
Check out the Reverse Beacon Network at
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

On 8/11/2014 9:39 AM, David Cole wrote:
Hi Jim,
Thanks for the expansion on that...  I know less than I want to know
about Power Line...  Any way you know of, that a power company will go
along with, to clean up power as it arrives?  Ferrite's on the power
lines etc?  I am almost afraid to ask the power company about adding
ferrite's to the incoming lines.

RFI mailing list

<Prev in Thread] Current Thread [Next in Thread>