Jim,
Is it possible to get at that switch & create a flat
setting? (Add another switch which interrupts the High wire
to add a High/Flat choice? I'm guessing they are adding or
removing a cap - so adding a 1/2 value cap should = Flat.)
Someone mentioned needing to pull the batteries if left
sitting, which I'm guessing could be solved via a micro-switch
somewhere in the battery-to-radio line.
WDYT?
David KD4E
>> Also a treble/bass switch.
>
> The only thing I don't like about it -- one setting rolls of the lows,
> the other rolls off the highs, and there's no "center = flat" setting.
> Too bad, because this is a spectacularly good FM RX.
>
> 73, Jim K9YC
--
David Colburn, KD4E - Nevils, Georgia USA
Safe & Secure Search Engine: duckduckgo.com
Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/
Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|