Gee, I grabbed some AA-cells, stuffed them into my F6a, and went
outside earlier - when I saw the original post - then forgot to
post the results!
On a fairly weak AM-BC station, out here in the countryside, I
observed significant directionality e.g. the signal was above
the noise level when I faced north or south and dipped below
the noise level when facing east or west.
It was starting to rain so I didn't attempt further tests.
HTH ... David KD4E
> On Mon,12/29/2014 11:50 AM, Jim Miller wrote:
>> I recently purchased a Tecsun -PL380 but overlooked the detail that it
>> doesn't cover 1710-2300 at all so it will also soon be sold.
>
> I wouldn't be in a big hurry to do that -- most noise sources that we
> hear on 160M will also be heard both above and below 160M -- they're
> either clocks for microprocessors, switching power supplies, or impulse
> noise from the power system.
>
>> So now I'm looking at the TH-F6a which has a ferrite bar for 10Mhz and
>> down.
>
> The TH-F6A does, indeed, have the directivity you would expect from a
> loopstick, but its sensitivity is quite poor. I use it when I get very
> close to sources in that frequency range -- it's great for identifying
> WHICH box or cables are radiating the trash. The Tecsun has FAR better
> sensitivity.
>
> 73, Jim K9YC
--
*David*
~KD4E~
Nevils, Georgia USA
Safe & Secure Search Engine: duckduckgo.com
Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/
Restored to design-spec at Heaven's gate 1Cor15:22
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|