RFI
[Top] [All Lists]

Re: [RFI] RF getting into 4-port wirelss router

To: RfI@contesting.com
Subject: Re: [RFI] RF getting into 4-port wirelss router
From: "john@kk9a.com" <john@kk9a.com>
Date: Mon, 12 Jan 2015 11:11:25 -0600
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
A 55' vertical is not resonant on 40m.  How are you matching it?  Do you
have a choke on the coax at the antenna?

John KK9A

To:     "Roger (K8RI)" <k8ri@rogerhalstead.com>, RfI@contesting.com
Subject:        Re: [RFI] RF getting into 4-port wirelss router.
From:   "Kenneth G. Gordon" <kgordon2006@frontier.com>
Reply-to:       kgordon2006@frontier.com
Date:   Mon, 12 Jan 2015 08:09:49 -0800



6) I am also, now, very suspicious of the ground system in the shack. I'll
review all of it as soon as I can get to it, and will follow the suggestions
mentioned by you folks. Although I do have a #12 bare copper wire
connected to the amp and the coax that feeds the antenna, and to the
electrical panel, I am now not sure it is contiguous.

vy 73,

Ken W7EKB

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>