RFI
[Top] [All Lists]

Re: [RFI] RF quiet HVAC

To: rfi@contesting.com
Subject: Re: [RFI] RF quiet HVAC
From: "john@kk9a.com" <john@kk9a.com>
Date: Wed, 2 Dec 2015 12:25:48 -0500
List-post: <rfi@contesting.com">mailto:rfi@contesting.com>
You need to be in a warmer climate for heat pumps to work efficiently. I
have several units and my main floor one also has a propane furnace that
takes over when it is less than 30 degrees outside.  I have noticed no RFI
with any of my American Standard heat pumps.

John KK9A


To:     rfi@contesting.com
Subject:        Re: [RFI] Fwd: Re: RF quiet HVAC
From:   "Roger (K8RI)" <k8ri@rogerhalstead.com>
Date:   Wed, 2 Dec 2015 02:33:38 -0500

I should have said that heat pumps are out of the question.
When I told the several reps that came out what it cost to heat and cool
our small home (1100 sq ft) the payback was so long that I'd have to
replace the whole thing before it ever reached the payback which was about
50 years. Of course I'd like to reach that point and be in good health.
I'd be 125.
I'd need about 5 more lifetimes just to do what I wanted to do in this one.

73

Roger  (K8RI)
from [Roger (K8RI)]     [Permanent Link][Original]
To:     rfi@contesting.com
Subject:        Re: [RFI] Fwd: Re: RF quiet HVAC
From:   "Roger (K8RI)" <k8ri@rogerhalstead.com>
Date:   Wed, 2 Dec 2015 02:33:38 -0500
List-post:      <rfi@contesting.com">mailto:rfi@contesting.com>
I should have said that heat pumps are out of the question.
When I told the several reps that came out what it cost to heat and cool
our small home (1100 sq ft) the payback was so long that I'd have to
replace the whole thing before it ever reached the payback which was about
50 years. Of course I'd like to reach that point and be in good health.
I'd be 125.
I'd need about 5 more lifetimes just to do what I wanted to do in this one.

73

Roger  (K8RI)

_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>