On my system the 'optimizers' are built into micro inverters on the back of
each panel. I hunted for noise on all hf bands and could only find a little
bit on 10m when aimed straight at the panels, a couple ferrites clamped on
each inverter dropped that below the noise floor. So they can be made
quiet.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net:7373
-----Original Message-----
From: RFI [mailto:rfi-bounces@contesting.com] On Behalf Of Tom Lizak
Sent: Friday, March 17, 2017 18:50
To: RFI@contesting.com
Subject: [RFI] Solar Panel RFI
I am waiting for a large solar panel array to be put up next to a
fire/police station and have those RFI issues present...it won't be long
before they are "dismantled". How come some solar panels can be used w/o
optimizers? Are they more expensive ?
These optimizers can be "calmed" down by using proper RFI engineering
techniques but to save a few $$$, the companies building them just don't do
this............and probably "made in CHINA", where else, eh?
73
K1TL...
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|