Hi Eric,
HF RFI mostly couples via wires attached to the equipment. The only wire
on these boxes is their AC power cable, which is 99.99% likely to be
running an SMPS, which is in turn running a digital power amp. I would
be VERY surprised if you don't hear RF noise from the SMPS. A serious
ferrite choke on the AC cable should kill the worst of it, but there
will be no fix for SMPS or digital noise radiated directly from the
unit. A good design will avoid that by good circuit layout and
construction.
73, Jim K9YC
On 12/13/2017 4:03 PM, Eric Rosenberg wrote:
Being that the speakers are amplified are powered, has any Somnos owner on
this list had problems with RFI?
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|