I started having some very bad noise problems more noticeable on 10m.
Power off the house and found the circuit where the noise was coming from.
Turned off a light that had an led bulb in it and that particular noise
My tower and 3 ele beam is about 100 ft from this noise source.
The bulb in question is a Eleta Candle light E12 candelabra base warm
white ac85-265v 3w
the noise produced on the K3 Meter was S9 to a bit over!
Buyer beware. I purchased these off Amazon.
I have some others I will test to see if this particular bulb is just
bad or they are all this way.
RFI mailing list