Heh, you caught my mis-speak. I was
sitting at lunch with some friends at an
Indian restaurant just a bit ago on
reflection, realized I worded that
incorrectly.
The inverter is to run my station's 120V
needs & the computer, the K3 and the
rigrunner powerpole. All are connected to
the deep cycle battery. The IOTA
DLS-55/IQ4 power supply is also connected
to the battery to keep it constantly
charged. This way, only one wall outlet is
needed for all the station's needs.
So the K3 is powered by the battery but
also in contact with the inverter's input.
73,
Gary
KA1J
> On 11/4/2018 9:21 AM, Gary Smith wrote:
> > I will be powering my K3s
> > with this so RFI is a major concern.
>
> Elecraft rigs, including the K3S, run on 12-14VDC. Why an inverter to
> run them?
>
> 73, Jim K9YC
>
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
>
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|