On 7/7/2019 4:26 PM, Chuck Gooden wrote:
Is there any steps that I can take with this power supply to reduce
the radiated and conductive emissions if any? Like mounting it in a
metal EMI case, Torrids on both the input and output leads, more
capacitance on the output, etc.
See my advice on killing RX noise. k9yc.com/publish.htm It starts with
replacing all SMPS with linear. How much current do you need? Does it
need to be regulated? What frequencies are you concerned with? Certainly
choke both ends of every ethernet cable, and every cable connected to
that system, including AC cables. I've found moderately priced
un-regulated linear supplies at one of the major electronics
distributors. Don't recall which one.
73, Jim K9YC
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|