[Top] [All Lists]

[RFI] Covering Solar Panels To Assess RFI

To: Rfi List <rfi@contesting.com>, "Hare, Ed W1RFI" <w1rfi@arrl.org>, "Gruber, Mike W1MG" <mgruber@arrl.org>, "Cianciolo, Paul, W1VLF" <pcianciolo@arrl.org>, Tony Brock-Fisher <barockteer@aol.com>
Subject: [RFI] Covering Solar Panels To Assess RFI
From: Tony <dxdx@optonline.net>
Date: Tue, 25 Aug 2020 20:44:08 -0400
List-post: <mailto:rfi@contesting.com>

The the inverter on my neighbors solar panel installation was recently replaced to reduce the RFI caused by the system. The swap only made a slight change in the interference.

This left the solar panels as the possible source of RFI so my neighbor and I conducted a test we've done previously which involves covering each panel with tarps to see what affect it would have on the noise.

We found that the RFI completely disappeared while the tarps were blocking the Sun from reaching the panels. The noise returned when we removed the tarps.

I reported this to SolarEdge and they now believe that the panels are the cause of the interference. They mentioned 2 other installations that had this same problem with panels that were manufactured in China by Hanwha and Trina.

The takeaway is that solar panel systems need to be checked from top to bottom when checking the system for interference. I'm hoping SolarEdge will keep this in mind when they address their next RFI case.

We also reported our test results to the company who leases the panels to my neighbor. No response yet.


RFI mailing list

<Prev in Thread] Current Thread [Next in Thread>