While slightly out of your price point the Flex 6000 series radio’s wide noise
blanker does wonders on powerline noise. I have a few videos on YouTube.
The 7300 noise blanker is more effective on impulse noise and not so effective
on powerline broadband noise.
73
David De Coons wo2x
Sent from my iPad
> On Nov 19, 2020, at 6:14 PM, David Eckhardt <davearea51a@gmail.com> wrote:
>
> Spend a tad more and purchase something outstanding, not only the NB, but
> the rest of the radio. Take a serious look at the Icom 7300. The NB just
> works! Recently, I've seen them go used for as low as $850, but that is
> rare.
>
> Dave - WØLEV
>
>> On Thu, Nov 19, 2020 at 10:33 PM Charles Plunk <af4o@twc.com> wrote:
>>
>> I am considering purchase of a used or new rig with DSP under 1k.
>> Looking for personal opinions on a specific rigs DSP's effectiveness to
>> combat power line noise if any at all. My mode preferences are cw first,
>> then digital, ssb, AM broadcast swl.
>>
>> My Elecraft KX2 DSP and BHI do very little IMO for power line arc. NB's
>> on my old TS830s and TenTec Triton IV (both non DSP) work pretty well
>> but not perfect on consistent power line arc, intermittent arc less
>> effective.
>>
>> Not really interested in any responses of getting the power co to fix,
>> how to locate, etc. Been through all this, looking for something to help
>> filter it until a fix is effected. I suspect most answers will be DSP
>> just was not designed to do that but there is hope, lol.
>>
>> Thanks!
>>
>> Chuck
>>
>> AF4O
>>
>> _______________________________________________
>> RFI mailing list
>> RFI@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rfi
>>
>
>
> --
> *Dave - WØLEV*
> *Just Let Darwin Work*
> _______________________________________________
> RFI mailing list
> RFI@contesting.com
> http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|