Hello Mike,
I use the METAL CASE Tripp-Lite "Isobar Ultra" Diagnostic Surge Suppressor on
my ham AC power and on my entertainment system AC power. It has a fair amount
of filtering along with the surge suppression. That took care of my
entertainment system RFI. YMMV
73
Lloyd N9LB
-----Original Message-----
From: RFI [mailto:rfi-bounces+lloydberg=tds.net@contesting.com] On Behalf Of
Michael Germino
Sent: Sunday, May 02, 2021 8:28 PM
To: Rfi List <rfi@contesting.com>
Subject: [RFI] Unplugging TV and plugging it back in stops RFI problem
(temporarily)
This has happened more than once. I get on a 80 meter net and knock my wife's
program off, I'm running about 600 watts. I then try 50 watts and still kick
the program off. The next day all I do is unplug the TV for a half minute and
plug it back in and I can run 800 watts.
Over the years I have added lots of toroids on many leads at the TV. The power
to the entertainment center is thru one of Jim's brute force filters. I guess I
can try more toroids on the two HDMI cables going into the TV.
With the problem being intermittent, it looks like I can only throw toroids at
it and hope one will work. Any Ideas?
It seems to be happening more often, but the TV can work with no problems for
months or a day.
Mike73, AD6AA
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|