RFI
[Top] [All Lists]

Re: [RFI] Noise to identify

To: rfi@contesting.com
Subject: Re: [RFI] Noise to identify
From: Jim Brown <jim@audiosystemsgroup.com>
Reply-to: jim@audiosystemsgroup.com
Date: Sun, 6 Jun 2021 23:35:28 -0700
List-post: <mailto:rfi@contesting.com>
On 6/6/2021 8:37 PM, Hugo Loranger wrote:
https://youtu.be/Syn973SUDSY   - Part 2
No RF spectrum
https://youtu.be/kV89pinFfZc   - Part 3
No RF spectrum
https://youtu.be/uKfoQV8NzpU   - Part 4 with waterfall
Did you study the link to my tutorial and the screen grabs of the 
spectra and waterfalls?  The frequency scales should be much wider (full 
200 kHz), averaging should be set to the max, and the amplitude scale 
should extend full amplitude with the weakest parts of the spectrum at 
the very bottom of the display. When you do this, considerably more 
detail will be clear. As it is, you can't see the forest for the trees!
73, Jim K9YC


_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi

<Prev in Thread] Current Thread [Next in Thread>