I don't know if with DX Engineering Portable Receive Preamplifier-Attenuator
DXE-NL-PRE-ATT-1 if that would make the product perfect by adding a directional
HF and VHF antenna?
Hugo Loranger
________________________________
Ce message est confidentiel et est à l'usage exclusif du destinataire nommé
ci-dessus. Si vous recevez ce message par erreur, sachez qu'il est interdit de
le diffuser, de le distribuer, d'en dévoiler le contenu ou de le reproduire.
Veuillez informer immédiatement l'expéditeur par courrier électronique et
détruire l'original de ce message ainsi que toute copie.
________________________________
Envoyé depuis mon téléphone intelligent Samsung Galaxy Note 10+.
-------- Message d'origine --------
De : Lee STRAHAN <k7tjr@msn.com>
Date : 2021-06-16 23 h 33 (GMT-05:00)
À : Lee STRAHAN <k7tjr@msn.com>, Hugo Loranger <ve2_ugo@hotmail.com>,
RFI@contesting.com
Objet : RE: TinySA as an RFI research tool
Hi All again,
While I am thinking of it I also tried the little radio called a Malachite.
It suffers the same problems but is a bit more sensitive than the TinySA. One
of these with some sort of antenna and preamp looks to me like it would be
pretty good. Neither of the two TinySA or Malachite worked as well as the
Tecsun PL660 without externals.
Just my 2 cents worth.
Lee K7TJR OR
-----Original Message-----
From: RFI <rfi-bounces+k7tjr=msn.com@contesting.com> On Behalf Of Lee STRAHAN
Sent: Wednesday, June 16, 2021 8:26 PM
To: Hugo Loranger <ve2_ugo@hotmail.com>; RFI@contesting.com
Subject: Re: [RFI] TinySA as an RFI research tool
Hugo and all,
I have looked at and tried the TinySA as an interference testing tool.
The sensitivity of the Tiny Sa only goes down to -100 dBm. I was thinking at
some point I would add a 20 dB preamp and try it again. As it is by itself with
the short vertical it is not sensitive enough to pick up much RFI. I
specifically am referring to 40, 80, and 160 meters. I did not try it on VHF
with a small beam. In addition, the small vertical antenna supplied with the
TinySA swings freely on its connector and will not stay vertical or horizontal.
Lee K7TJR OR
-----Original Message-----
From: RFI <rfi-bounces+k7tjr=msn.com@contesting.com> On Behalf Of Hugo Loranger
Sent: Wednesday, June 16, 2021 7:57 PM
To: RFI@contesting.com
Subject: [RFI] TinySA as an RFI research tool
Hi,
What do you think of TinySA as the main tool for RFI research in order to
intervene effectively instead of a simple portable HF radio?
73!
Hugo
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|