Not off topic at all. The first step most guys try it to replace the GFI. There
are a couple of recommendations found here:
http://www.arrl.org/gfci-and-afci-devices
73 and Good Luck,
Joe kk0sd
-----Original Message-----
From: RFI <rfi-bounces+gary_mayfield=hotmail.com@contesting.com> On Behalf Of
Bob Kozlarek WA2SQQ
Sent: Thursday, November 11, 2021 8:38 AM
To: rfi@contesting.com
Subject: [RFI] RF vs GFI
This might be off topic, so I apologize in advance. When I get on 75 / 40m my
RF trips the GFI portion of the thermostat for radiant heating in my bathroom.
Not sure how to approach this? Would I use a line filter, but is it considered
line noise? Perhaps a few ferrite chokes on the leads feeding the heating mesh
in the floor? Suggestion would be appreciated.--
*Best 73 de WA2SQQElmwood Park, NJ"The only dumb questions are those we don't
ask"* _______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|