I have had no issues with the AFCI's I put in when I redid my kitchen a couple
years ago. Breaker panel is in the same room as my shack. I have always had
noise issues on 160 and they didn't get any worse (or better for that matter)
when I put the AFCI's in.
TomW3TA
-----Original Message-----
From: Gene Smar via RFI <rfi@contesting.com>
To: rfi@contesting.com <rfi@contesting.com>
Sent: Thu, Mar 16, 2023 1:23 pm
Subject: [RFI] Inquiry - AFCI RFI?
Gents:
I'm having my electric service panel in our home replaced and wanted to
ask if any of you have had experience, either good or bad, with code-required
arc-fault circuit interrupters and related RFI? I believe I read somewhere
that either these or GFCI's were problematic in generating RFI, especially on
the lowbands. I'd like to make sure I don't make things worse for myself by
allowing the electrician to install the wrong AFCI design or brand. I've also
read that AFCI's often trip unnecessarily. Any comments on that aspect as
well?
Many thanks.
73 deGene Smar AD3F
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|