An example of unexpected results with ethernet cables. I replaced a unshielded CAT5
with shielded CAT6 and RFI from the new cable was substantially higher. It was inside my
steel shop/shack. Lesson: use fiber links whenever possible.
Grant KZ1W
On Saturday, May 20, 2023 at 05:01:53 PM PDT, Greg Troxel <gdt@lexort.com>
wrote:
David Colburn <qrv@kd4e.com> writes:
If I run lines to an outdoor camera that are outside for more than
several feet,
should I protect them with something like this?
https://www.amazon.com/Tupavco-Ethernet-Protector-Gigabit-1000Mbs/dp/B00805VUD8
There's a very deep question lurking. We more or less take on faith
that cables that are outside are dangerous and ones entirely inside are
safe. But the house is often not a sealed metal box. I'd be interested
in comments from people who understand better.
But, it does make sense to me to treat the Ethernet cable to the camera
the way that code requires antenna coax to be treated, as it's not so
different from the lightning viewpoint.
73 de n1dam
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi