I have about 8 USB cables in my station, two going directly to my
computer and 6 to a hub. I suspect some RFI because periodically- every
couple of hours - a couple of USB devices - keyboard, mouse, Winkeyer -
stop working. Stopping and re-starting N1MM does not cure it - I have
to restart Windows 10, and then it's OK again for a few hours. There
doesn't seem to be any correlation between the band in use and the
problem - in fact, sometimes when I come back to the station after hours
away, with N1MM left running, what was working has now stopped, and a
computer restart is required.
I'm wondering if it is feasible/useful/foolish, with several USB cables
going to a single physical location (back of computer, front of
computer, hub) to wind the cables that terminate nearby together on a
single big 31 core, or do I need one core per cable to be useful ?
--
73, Pete N4ZR
_______________________________________________
RFI mailing list
RFI@contesting.com
http://lists.contesting.com/mailman/listinfo/rfi
|