I'm confused....earlier AA5AU and W7?? mentioned that a simple qsl/tu was
all the acknowledgement that was needed. A VK??? seemed to think as Andy
does that the received report must be sent back to the tranmistting station
as in:
QSL ur 599 TX QRZ de WW3S
I'm looking forward to trying this today but need to know which format is
correct?
73 Jamie WW3S
----- Original Message -----
From: "Andrew J. O'Brien" <obrienaj@netsync.net>
To: "RTTY Reflector" <rtty@contesting.com>; <digitalradio@egroups.com>
Cc: <MMTTY@yahoogroups.com>
Sent: Saturday, December 01, 2001 10:33 AM
Subject: [RTTY] MMTTY for the TARA Sprint today
> If you are using straight MMTTY for the TARA Sprint today , %s is the
> macro you MMTTY users will need to keep in mind .. %s will echo back the
> RST that you received and the state/province or serial number that TARA
> requires. Remember to put MMTTY in contest mode by going to LOGGING
> OPTIONS, check the RST+serial number option, and also select your RST to
be
> 599 and you are all set.
>
> To capture the exchange, click the state, serial number or province and
> MMTTY will capture it to the RST area with 599 appended to it..
>
> Andy KB2EOQ
>
>
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
|