Thanks to all for suggestions.
I was able to get the ADIFCONV file to work by setting it's properties to
'win98' compatible and then running it from the small command line option in
XP.
It doesn't start every time. But if you try a couple of times it starts and
exported the file properly.
----- Original Message -----
From: "Mobile Workshop" <mobile.workshop@guernseytelecoms.com>
To: "'FireBrick'" <w9ol@billnjudy.com>
Sent: Monday, March 11, 2002 6:41 AM
Subject: RE: [RTTY] converting wf1b logs into adif
> OK Bill,
>
> You need to get MOSLO from http://www.hpaa.com/moslo/ and then add that
to
> the command line.
> You'll find the "evaluation" version at the end of the page.
> It works as well as the full version, and I found it worked quite happily
on
> my 800MHz PC.
> Take a look at http://www.hpaa.com/moslo/inwin.asp for more
instructions.
>
> It isn't the easiest thing to set up, but the instructions do help a bit.
> If you just type MOSLO at the command line, it will tell you the syntax.
>
> However, I have no idea whether it will be compatible with XP!
>
> If you go to http://www.rttyinfo.net/downlods.htm you can get either
MOSLO,
> or BREMZE, which is supposed to work as well.
> It will also tell yo uwhat each of the "runtime" errors mean.
> You will also find the last (latest) version of WF1B, although I don't
think
> Ray made any changes to ADIFCONV in the latter stages.
>
> If you still get stuck, then email at home pcooper@guernsey.net and I
will
> check my settings for MOSLO.
> If the BIN files aren't too big, I could try and convert one at home for
> you, and see how well it works.
>
> Very best 73 for now
> Phil GU0SUP
>
>
> **********************************************************************
> This email and any files transmitted with it are confidential
> and intended solely for the use of the individual to whom
> they are addressed. If you have received this email in error
> please notify the author immediately and delete it, together
> with all copies, from your system. You are unauthorised to
> directly, or indirectly, use, disclose, distribute, print or copy
> any part of this message if you are not its intended recipient.
> Any views or opinions expressed are solely those of the
> author and do not necessarily represent those of
> Guernsey Telecoms Ltd.
>
> Information held on any of Guernsey Telecoms' computer
> systems is the property of Guernsey Telecoms Ltd. Guernsey
> Telecoms Ltd reserves the right to monitor and review the
> content of all information, messages and attachments sent
> to or from this e-mail address.
>
> **********************************************************************
>
>
>
|