RTTY
[Top] [All Lists]

[RTTY] Re:[WriteLog] RTTY Function Key memory bank Help

To: <rtty@contesting.com>
Subject: [RTTY] Re:[WriteLog] RTTY Function Key memory bank Help
From: llindblom@juno.com (llindblom@juno.com)
Date: Mon, 29 Jul 2002 14:17:46 GMT
Try %E at the end of the message and see if that resolves your problem.  If 
not???

73 W0ETC

---------- "RCARIELLO" <RCARIELLO@si.rr.com> writes:

From: "RCARIELLO" <RCARIELLO@si.rr.com>
To: "Writelog" <writelog@contesting.com>,
   "RTTY Reflecter" <RTTY@contesting.com>
Subject: [WriteLog] RTTY Function Key memory bank Help
To: <rtty@contesting.com>
Date: Mon, 29 Jul 2002 13:09:06 -0000

Hello to all,

I am trying to set up saved messages using the function key memory bank for
RTTY operation. After the message is sent the Rttyrite program will not
receive anything until I hit the Esc. key. Is there a control code that I
can place at the end of the message text to do this automatically? I checked
the help files but did not see anything.

Just to mention, I am not set up to send the message to the radio. The text
is seen displayed on the screen but is not being transmitted. I don't think
this would cause the problem but I thought it a good idea to mention.

Thanks,
Rich AA2MF

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog





<Prev in Thread] Current Thread [Next in Thread>
  • [RTTY] Re:[WriteLog] RTTY Function Key memory bank Help, llindblom@juno.com <=