YES, the audio needs to go to the PACKET jack for AFSK mode. However, I
wonder why you don't just use FSK to the RTTY jack?
You should also be aware that inputting the audio to the PACKET jack will
not utilize VOX. You will need a PTT line to key the rig.
It is possible to input the audio to the PHONE jack - That IS in the VOX
circuit, but I still recommend an FSK/PTT line.
----- Original Message -----
From: "Boris Knezovic T93Y" <t93y@lsinter.net>
To: <rtty@contesting.com>
Sent: Thursday, November 20, 2003 2:29 PM
Subject: [RTTY] FT-1000MP owners I need help...
> Hi all!
>
> I am getting ready for my 25. November to 02. December contest DXpedition
> to Martinique (http://www.t93y.com/fm2003) and, as I want to be ready in
> advance, I need help from FT-1000MP owners in order to operate RTTY from
there.
>
> I am looking at the FT-990 manual and need someone to confirm that my
> soundboard AFSK (standard two transformers and optocoupler unit used with
> my TS-690) should be connected to the PACKET jack on the back (1-data in,
> 2-gnd, 3-ptt, 4-data out, 5-busy). If it is different, please let me know
> what type of connector I need and what is the proper pinout.
>
> I do not think this is of much interest for other people on the reflector
> so please reply direct. Thanks in advance.
>
> 73's Boris T93Y
>
> ---
> Boris Knezovic T93Y, P.O. Box 59, Sarajevo BA-71000, Bosnia and
Herzegovina
> E-mail : t93y@lsinter.net or boris@t93y.com
> WEB Page : http://www.t93y.com
> ---
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|