I have been able to do that with my rigs too during CQ WW Rtty
I got RF probably from 2nd Radio a TS850 +1kw to a TS2000 Run Radio.
The RX got lower and weak.... but I could barely copy the few RTTY
signal.
Mostlty there is a barrier which like a Diode or a Mute Transister blows
of if your RX gets to high lever of signals....
HAppened to me 4 times on several radioes.
Its so that new technology of radioes with cheap crappy components,
makes us to protect even more than before
Maybe using double sets of bandpass filter +++++ had helped a lot + REAL
ground system between radio's in SO2R setup.+++
Regards & 73 de
RAG ~ Stein Roar Brobakken Hamradiocallsign: LA6FJA
Grønvold
NO-2830 Raufoss
mailto:s-roabr@online.no
http://www.qsl.net/la6fja
Telephone home: +47 611 944 54
Cellphone# 1: +47 48 22 44 21 (Job) Cellphone# 2: +47 91 72 38 72
(Private)
Telefax job: +47 611 51 875
-----Opprinnelig melding-----
Fra: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] På
vegne av Steve AI9T
Sendt: 13. november 2004 07:06
Til: RTTY Group
Emne: [RTTY] Receiver Problems
About 20 minutes into the WAE contest the receiver on my ICOM 756 PRO
went south. Don't think I hit it with to much RF from the other rig??
Anyone else had a problem with the receiver on the PRO or maybe know an
easy fix? IF not, anyone know a good place where I could get it repaired
close to IL??
Thanks
--
73
Steve AI9T
http://www.ai9t.com
QSL via LOTW and EQsL
_______________________________________________
RTTY mailing list
RTTY@contesting.com http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|