Ed:
I have no need on my OmniVI+ to use XIT. FSK receive is LSB shifted up
2120hz.
John N1JM
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com]On
Behalf Of K4SB
Sent: Saturday, February 26, 2005 10:24 AM
To: rtty@contesting.com
Subject: Re: [RTTY] OMNI VI
I like to ask a question of the other guys who use this rig.
The manual clearly states that even while FSK mode is in use, receive
is on LSB.
I though I had solved this problem by using the XIT to raise the
transmitted
frequency by 1.41 kHz.
However, while chatting with a local, he says 1.21 is correct ( He
transmits and I "walk" the XIT to his frequency. A QSO I had yesterday
resulted in a +1.28 offset.
Would appreciate hearing from any others on what you use.
Hope to see you in the test in a few hours.
73
Ed
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|