Hi David,
there are several possibilities to save COM-ports:
1. rig-control through USB-to-RS232-converter. That works very fine.
For two rigs you need two of them.
2. FSK & PTT through the same COM-port.
73 + 55
Wolf, DL6JZ
David Hachadorian schrieb:
>
> ----- Original Message -----
> From: "Tom Osborne" <w7why@verizon.net>
> To: "RTTY" <rtty@contesting.com>
> Sent: Monday, April 04, 2005 7:47 PM
> Subject: [RTTY] com ports
>
>
> > Hi all
> >
> > Got a new radio coming this week, a TS-450SAT with all
> filters, etc.
> > Just doing some figuring and I don't have enough
> comports to do all
> > that I want to do.
> >
> > It has FSK and I want to set it up and that takes one
> comport. One
> > fot PTT, one for radio control, and one to hook to the
> other
> > computer if I run SO2R. That's 4 and I got 2.
> >
> > What is the best solution? TIA
>
> Depending on what logging program you are using, you may
> be able to
> get by with just two com ports; One for FSK, and one for
> Radio
> Control/PTT. Network via Ethernet.
>
> I do the two radio thing with one computer, which runs
> both Windows XP
> and DOS, depending on the application. I use four com
> ports, and have
> had good luck with this board:
>
http://www.newegg.com/app/ViewProductDesc.asp?description=15-124-019&depa=0
>
> The manufacturer's Website states that this board can do
> IRQ sharing,
> and I have it set up that way in my system. The four
> ports set
> themselves up as coms 4-7, all on IRQ 16.
>
> Dave Hachadorian, K6LL
> Yuma, AZ
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|