RTTY
[Top] [All Lists]

Re: [RTTY] Tuner for High Power RTTY

To: "Rick Mintz" <Rmintz@Rochester.rr.com>
Subject: Re: [RTTY] Tuner for High Power RTTY
From: steve@ai9t.com
Date: Fri, 28 Jul 2006 11:05:24 -0400 (EDT)
List-post: <mailto:rtty@contesting.com>
Rick

A Nye-Viking would handle that. The MB-V is a good one. It has a coax
bypass switch. You can find them on e-bay every once in a while. Pretty
expensive purchased new.

73
Steve AI9T
www.ai9t.com

> Hi Gang,
>
> I am looking for suggestions for a tuner that can handle RTTY contesting
> at 1500 watts on 40 meters (only). I have a Drake MN-2000, but I don't
> think that it can handle the average 5 second XMIT - 3 second RECV in a
> contesting environment.
>
> (Just finishing a Class E, 40 meter, solid state amp project for RTTY. It
> has so far produced 1850 watts into a Bird 2500 watt dummy load for 30
> minutes continuous.)
>
> Any suggestions or ideas? Thanks.
>
> Rick W1TY/W2RTY
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>