The old 850 Hz shift used 2121 and 2975 as
frequencies.
2125 is fifth harmonics of 425 Hz
and 2975 is the seventh harmonics.
So you can use a standard 425 Hz tuning fork
as tuning aid.
73 de Jan - SM5FUG
> The following is posting for Chris, N3JLY, who is not on the RTTY-Contesting
> reflector. If you respond, please copy Chris Smolinski
> <csmolinski@blackcatsystems.com>
>
> Dick AA5VU
>
> ------ Forwarded Message
> From: Chris Smolinski <csmolinski@blackcatsystems.com>
> Date: Thu, 28 Sep 2006 11:29:19 -0400
>
> Hi Dick,
>
> Sure, please go ahead and post it, thanks! I'm sure someone out
> there knows the history. I am curious if the shifts commonly used are
> based on some engineering/technical reasons, or if they were
> arbitrarily chosen.
>
>> On 9/28/06 8:45 AM, "Chris Smolinski" <csmolinski@blackcatsystems.com>
>> wrote:
>>
>>> Someone asked me why much of the military RTTY on HF commonly uses
>>> 850 Hz shift. I am curious if anyone knows the history behind the
>>> selection of this shift rate, or if it was just arbitrary.
>>>
> ------ End of Forwarded Message
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|