RTTY
[Top] [All Lists]

Re: [RTTY] SO2R, small lot?

To: RTTY List <rtty@contesting.com>
Subject: Re: [RTTY] SO2R, small lot?
From: Barry <w2up@mindspring.com>
Date: Sun, 01 Oct 2006 19:37:10 +0000
List-post: <mailto:rtty@contesting.com>

Bill Coleman wrote:
> On Jul 25, 2006, at 12:46 AM, Chris wrote:
>
>   
>> If quality filters (and or stubs) are used, what have others
>> experienced as minimum speration distance of a beam at 40ft and a
>> vertical for SO2R operating at or near 100w?
>>     
>
> Sorry to reply to an old thread.
>
> I don't know about 40 feet, but I've been successful at running a  
> limited SO2R on phone with a tribander and vertical separated by 120  
> feet with NO filters at all and 100 watts.
>
> Of course, you'll hear noise if you get near the second harmonic of  
> the transmitting rig (although that doesn't happen so often with phone).
>
> It would probably go better with some filters. I've see designs on  
> the web for coaxial stubs, which seems like they would work well.
>
> At 40 feet, you're going to get 9 times more bleedthrough than I have  
> at 120 feet, so you are at higher risk for fundamental overload.
>
> I've also used an 80m doublet that has one leg anchored to the tower  
> that holds the tribander.
>
> Bottom line: this can work, you'll have to try it and see.
>
> Bill Coleman, AA4LR, PP-ASEL        Mail: aa4lr@arrl.net
> Quote: "Not within a thousand years will man ever fly!"
>              -- Wilbur Wright, 1901
>
>
>   
I run 1 tower SO2R.  With stubs and bandpass filters 100 W is no problem 
at all.  I usually run high power and only have problems with 2nd 
harmonics +/- 10-15 KHz.

I used a vertical for the second radio initially and replaced it with a 
TH7 at 25 ft.  The difference was 5-6 S units!  Verticals suck, big-time!

Barry W2UP

-- 

Barry Kutner, W2UP             
Newtown, PA                     

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>