My direct reply to Ian may have bounced.
The answer can be found at:
http://www.rttycontesting.com/writelog/commslot.htm
73, Don AA5AU
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of Bill Turner
Sent: Wednesday, January 03, 2007 10:11 AM
To: Ian
Cc: RTTY@contesting.com
Subject: Re: [RTTY] Comm Port
ORIGINAL MESSAGE:
On Tue, 2 Jan 2007 19:27:48 -0800, "Ian" <ve7ira@telus.net> wrote:
>I need fast help
>
>i am running laptop with writelog
>
>have one comm port for fsk
>
>have second comm port via usb cable and it reads comm 5 in system
>hardware
>
>would like to run rig control on the usb serial port but can not figure
>out how as the only ports under setup is comm 1-4
>
>anyone can help me
>
>PLease
>
>Thanks Ian VA7SW
------------ REPLY FOLLOWS ------------
I'm no great expert on this, but if you are running Windows XP you should be
able to change the com port number. Go to Control
Panel>
System>Hardware>Device Manager>Ports. Expand Ports to show your
present Com5 port. Right-click on your Com5 port and click on Properties. Click
on Port Settings>Advanced. At the bottom of this
window you will see the port number as 5. Change it to whatever you like, but
try to avoid conflicts with other hardware such as
your modem, etc.
That should allow you to choose a port between 1 and 4. Sorry this is so
complex, but that's how Windows is.
73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|